BOUTIQUE system is a highly flexible and self-amplified PA/VA system targeting small to large installations.
The BTQ-VM4W/VM8W is a wallmount compact PA/VA controller with integrated battery charging unit for secured battery backup and power sharing. The BTQ-VM4W/VM8W offers 4 and 8 monitored speaker zones respectively.
The controller is integrated with 250W or 500W high efficiency Class-D amplifier built-in and is capable of handling 1000W speaker load per zone and 2000W max. per unit. Each controller can be networkable with up to 64 BTQ-VM4/BTQ-VM8/BTQ-VM4W/VM8W or BTQ-SG8 secondary global unit via global-net. This will then extend as little as 4 monitored A/B speaker zones to a large networked system of up to 16,384 zones. The BTQ-SG8 is linked to the controller via CAT5/6 cable (max. length 100m between units), multi-mode (2 km) and single-mode (20 km) fibre optics or even longer distance upon request.
The BTQ-VM4W has 5 monitored EVAC inputs and 4 relay control outputs, while the BTQ-VM8W has 9 monitored EVAC inputs, 8 logic control inputs and 8 relay control outputs, which can be individually programmed for specific message/input routing to all or selected channels. Moreover, the controller has 10 audio sources including two music inputs, one mic/line input, one USB input, SIP call in, one fireman microphone and two digital paging and control interfaces. Each digital paging interface provides 2CH audio inputs to simultaneously transmit bi-directional data communication in digital format. The two digital interfaces can connect up to 16 paging console or remote units for each and can be wired in a daisy chain or redundant loop. The Mic/Line input features VOX function (Voice Activation) and each input is fitted with volume controls and equalizers.
In accordance with EN 54-16 requirement, all BOUTIQUE system including paging microphones and loudspeaker lines provides full monitoring and fault reports. The system can easily setup and replacement from the LCD panel of BTQ-VM4W/VM8W, the advanced settings can be accessed by web browser such as volume, PEQ, audio routing, monitor and control, event and bell scheduler, paging with priority management (1~99 priority level) etc.
The BOUTIQUE system has full digital audio matrix and an internal message storage for up to 90 minutes and a USB interface for configuration backup and play G.711, G.722, G.726, G.727, MP3 and WAV files. In addition, multiple volume attenuators can be installed on a monitored speaker lines without the need for a loopback cable.
- Integrate with battery charging unit for secured battery backup and power sharing
- Background music and voice announcement can be distributed to different group of zones by using 2 built-in amplifiers
- Internal message storage for up to 90 minutes
- IP based music streaming and paging over LAN/WAN
- Easy integration with Terracom, TerraManager and IP phone via SIP protocol
- Internet radio receiver built-in
- Low cost 2 channel switching amplifier architecture
- Third party control via RS232 or Ethernet
- Optional Sound Masking module - reduce the intelligibility of human speech for protecting private speech privacy
Integrated Battery Charger
- Charging
- Voltage: 54VDC
- Charging current: 1.5A
- Maximum output current: 30A
- Battery capacity (4 x 12V): 10Ah to 30 Ah
- Recommended brands: Yuasa NPL Series, Power-Sonic GB Series, ABT TM Series, EnerSys VE Series, Eekta BTL Series, Long GB Series
Audio Characteristics (GENERAL)
- A/D-D/A bit resolution: 24 bit
- Sampling rate: 48k Hz
- Frequency response:
20 Hz ~ 20k Hz (±1 dB) @ 0 dBu
- Sensitivity: 0~40 dBu (adjust with rotary knob)
- SNR: > 80 dBA
- THD + N:
< 0.02 % @ 30 dB gain, -24 dBu (1k Hz) in
- EIN: < -86 dBra @ 0 dB gain
- Maximum input level (CD/AUX/mic): 17 dBu
- Maximum output level (line out): 17 dBu
- Crosstalk: > 70 dB @ 42 dB gain, 0 dBu (10k Hz) in
Audio Characteristics (CD/AUX)
Audio Characteristics (MIC)
- EIN: < -112 dBra @ 24 dB gain
- Input impedance: 8k ohm
- Input gain range: 0 ~ 40 dB (adjust with mic/line gain)
- CMRR: < -80 dB @ 40 dB gain, -40 dBu (1k Hz) in
- Phantom power: 48 VDC, 7 mA
Audio Characteristics (EX. AMP/LINE OUT)
- Output impedance (balanced): 30 ohm
Wattage Capacity
- BTQ-VM4/8W1: 1000W per zone/2000W (max.) per unit
Internal Power Amplifier
- Rated output power: 250W/500W (Class-D)
- Frequency response: 50 Hz ~ 18 kHz (±3 dB) @ 0 dBu
- THD+N: < 0.1 % @ 42 dB gain, 0 dBu (1k Hz) in
- SNR: > 90 dB
Loudspeaker Outputs
- Number of zones: 4 or 8
- Number of loudspeaker lines: 8 or 16, A/B speaker lines per zone
Relay Outputs
- Maximum voltage: 100 VDC
- Maximum current: 0.5A
Evac Inputs
- Voltage mode
- Maximum voltage: 72 VDC
- Active voltage: 18 ~ 72 VDC
- Inactive voltage: < 0.8 VDC
- Contact mode
- Non-isolated analogue interfaces with internal pull-up to +5V by 10k ohm
- Monitored analogue contact thresholds
- Faulty-open circuit: > 2.7 VDC
- Inactive voltage: 2 ~ 2.5 VDC
- Active voltage: 1.35 ~ 1.7 VDC
- Faulty-short circuit: < 0.6 VDC
Network
- Max. global-net units: 64
- Max. distance between global-net units: 100m (CAT5/6), 2 km (multi-mode fiber optic) and 20 km (single mode fiber optic)
- Max. remotes units
- Daisy-chain wiring
- 16 DPM sets (DPM-MAIN + EVA + KPD) for each remote port
- 32 DPM sets (DPM-MAIN + EVA + KPD) for 2 remote ports
- Redundant loop: 16 DPM sets (DPM-MAIN + EVA + KPD)
- Max. DPM sets (MAIN + EVA + KPD)
- Max. 16 DPM sets
- 1 DPM-MAIN attaches 1 DPM-EVA and 14 DPM-KPD
- 1 DPM-MAIN attaches 15 DPM-KPD
- Max. 128 keys for each DPM set
- Connection via flat cable
- Max. remote units: 16
- Max. communication distance between BTQ-VMW and remote unit: 250m (shielded RJ45 connector, STP CAT5/6)
Mechanical
- Dimensions (W x H x D)
- BTQ-VM4W/VM8W: 653 x 735 x 130 mm (25.7 x 28.9 x 5.1 inch)
- Weight
- BTQ-VM425W1: 19.3 kg (42.5 lbs)
- BTQ-VM450W1: 20.9 kg (46.1 lbs)
- BTQ-VM425W2: 19.6 kg (43.2 lbs)
- BTQ-VM450W2: 21.2 kg (46.7 lbs)
- BTQ-VM825W1: 20 kg (44.1 lbs)
- BTQ-VM850W1: 21.6 kg (47.6 lbs)
- BTQ-VM825W2: 20.3 kg (44.6 lbs)
- BTQ-VM850W2: 21.9 kg (48.3 lbs)
- Mounting: Wall-mount
- Color: RAL 7016
Environmental
- Operating temperature: -5 ºC ~ +55 ºC (+23 ºF ~ +131 ºF)
- Storage temperature: -40 ºC ~ +70 ºC (-40 ºF ~ +158 ºF)
- Relative humidity: 20% to 95%
- Air pressure: 600 to 1100 hPa
- Heat dissipation
- BTQ-VM425/825W1: 478 BTU/hr
- BTQ-VM450/850W1: 853 BTU/hr
- BTQ-VM425/825W2: 819 BTU/hr
- BTQ-VM450/850W2: 1570 BTU/hr
| Type |
File Name |
Download |
| Brochure |
| [PDF] |
Boutique System_Brochure_Fi |
|
| Type |
File Name |
Download |
| Catalogue |
| [PDF] |
Boutique_Catalogue |
|
| Brochure |
| [PDF] |
Boutique System_Brochure |
|
| Datasheet |
| [PDF] |
BTQ-VMW_datasheet_AE_en_vn1.14_web |
|
| Type |
File Name |
Download |
| Brochure |
| [PDF] |
BOUTIQUE_Brochure |
|
| Fiche produit |
| [PDF] |
BTQ-VMW_Fiche produit |
|
| Type |
File Name |
Download |
| Broschüre |
| [PDF] |
Boutique System_Brochure |
|
| Type |
File Name |
Download |
| Brošure |
| [PDF] |
BOUTIQUE_Brochure |
|
