Secondary global unit The BTQ-SG8 secondary global unit is an extension unit for BTQ-/VM4VM8 main controller. Up to 64 BTQ-/VM4VM8 or BTQ-SG8 can be cascaded via full redundancy global-net.
BTQ-SG8

The BTQ-SG8 secondary global unit is an extension unit for BTQ-/VM4VM8 main controller. Up to 64 BTQ-/VM4VM8 or BTQ-SG8 can be cascaded via full redundancy global-net.

The BTQ-SG8 is capable of handling 1000W speaker load per zone and 2000W max. per BTQ-SG8 unit. The BTQ-SG8 extends the number of input and output contacts available in the system, including 9 monitored EVAC inputs triggered either by dry contact or relay, 8 logic control inputs and 8 relay control outputs. The two digital interfaces can connect up to 8 paging consoles or remote units for each, and be wired in a daisy chain or redundant loop. It is also equipped with a USB port for message or music files playing.

In accordance with EN54-16 and UL2572, all BOUTIQUE system components and peripherals are monitored, this monitoring extends from a paging microphone capsule to the end of loudspeaker lines. The speaker lines are monitored for short, open circuit and leakage. In addition, volume attenuators can be installed on a monitored speaker lines. The BTQ-SG8 is also a eco-friendly product with extremely low power consumption during standby mode.

  • Support up to 16,384 zones connected to 64 x BTQ-VM4/VM8/SG8 via global-net
  • Control, management and monitoring via web browser
  • Paging with priority management, event and bell scheduler
  • USB interface for messages and music files
  • Internal message storage for up to 90 minutes
  • Both background music playing and paging can be simultaneously proceeded
  • Easy integration with Terracom and IP-PBX via SIP protocol
  • VoIP interface with standard SIP protocol
  • Paging source can be programmed with 1~99 level priority
  • Enhanced loudspeaker line surveillance for AB-zoned installation
  • Extremely low power consumption during standby mode
  • Volume attenuators can be installed on monitored speaker lines
  • 9 monitored EVAC inputs, 8 logic control inputs, 8 relay control outputs
  • 1 Fault relays & 1 EVAC relay output
  • 2 digital paging and control console interfaces
  • 1 USB 2.0 port

Third party control via RS232 or Ethernet

Electrical

  • DC power input: 24 VDC
  • Power consumption
    • Full power: 15W
    • Standby mode: 4W

Audio Characteristics

  • A/D-D/A bit resolution: 24 bit
  • Sampling rate: 48k Hz
  • Frequency response: 20 Hz ~ 20k Hz (±1 dB) @ 0 dBu
  • THD+N: < 0.01 % @ 0 dB gain, 4 dBu (1k Hz) in
  • EIN: < -80 dBu @ 0 dB gain
  • SNR: > 80 dB
  • Maximum output level: 17 dBu
  • Crosstalk: > 93 dB @ 0 dB gain, 0 dBu (10k Hz) in
  • Output impedance: 30 ohm

Wattage Capacity

  • 1000W per zone (max.)/2000W per unit (max.)

Mechanical

  • Dimensions (W x H x D): 1 RU high, 437 x 44 x 258.5 mm
  • Weight: 2.6 kg (5.7 lbs)
  • Mounting: 19" 1U rack
  • Colour: RAL 7016

Electrical

  • DC power input: 24 VDC
  • Power consumption
    • Full power: 15W
    • Standby mode: 4W

Audio Characteristics

  • A/D-D/A bit resolution: 24 bit
  • Sampling rate: 48k Hz
  • Frequency response: 20 Hz ~ 20k Hz (±1 dB) @ 0 dBu
  • THD+N: < 0.01 % @ 0 dB gain, 4 dBu (1k Hz) in
  • EIN: < -80 dBu @ 0 dB gain
  • SNR: > 80 dB
  • Maximum output level: 17 dBu
  • Crosstalk: > 93 dB @ 0 dB gain, 0 dBu (10k Hz) in
  • Output impedance: 30 ohm

Wattage Capacity

  • 1000W per zone (max.)/2000W per unit (max.)

Mechanical

  • Dimensions (W x H x D): 1 RU high, 437 x 44 x 258.5 mm
  • Weight: 2.6 kg (5.7 lbs)
  • Mounting: 19" 1U rack
  • Colour: RAL 7016
Type File Name Download
Catalog
[PDF] [en] Boutique System_Catalog
Brochure
[PDF] [en] Boutique System_Brochure
Datasheet
[PDF] [en] BTQ-SG8_Datasheet