Controller Switch Mode The IDA8C-SW is a controller (Switch Mode) which supports up to 4 audio sources including Evac / Voice / Music / Back up utilizing with a maximum capacity of 1000 W for each and the choice of audio source can be selected from one source only for the systems.
IDA8C-SW

The IDA8C-SW is a controller (Switch Mode) which supports up to 4 audio sources including Evac / Voice / Music / Back up utilizing with a maximum capacity of 1000 W for each and the choice of audio source can be selected from one source only for the systems.

The AteÏs local-net can be a network of one controller and a maximum up to 31 Slave units including IDA8C (Switch Mode) and IDA8C (Matrix Mode) in a local system. IDA8SAB (Switch Mode) provides the zones and audio in & out expansion using a secured 48 channel audio and data network over CAT5 or fiber optic. IDA8SAB (Switch Mode) requires less number of amplifiers with only 4 audio inputs/outputs from amplifier.

IDA8C-SW/IDA8SAB-SW supports up to 4 sources including Evac/Voice/Music/Backup. Each zone can be routed to one of the system’s audio channels. The four channels can be switched ON/OFF in each zone separately. In case of Evacuation, the three channels can be used as a second alarm channel. A IDA8C (Switch Mode) shall only require up to 4 channel amplifier and the amplifiers will act as a backup amplifier in case of other amplifiers break down.

Note: In cooperation with RU devices for redundancy purpose, please refer to our local sales for:

* External DC power calculation for IDA8S

* Special order for IDA8C, IDA8C-SW, IDA8SAB and IDA8SAB-SW

Security

  • In accordance with EN54-16, ISO 7240-16 and BS5839/8-full monitored supervision from paging microphone capsule, amplifier monitoring to the end of loudspeaker line
  • Enhanced loudspeaker line surveillance for A/B zone wiring
  • Support redundant network cabling, wired as a redundant loop

Connectivity

  • Up to 48 simultaneous audio channels per local network
  • Up to 256 zones in a local network, and up to 8,192 zones in a global network
  • 4 x channel audio distribution for EVAC, Paging, BGM & Backup
  • Power: AC Maximum Consumption = 48 W
  • Amplifier Zone Outputs: Maximum level = 14 dB / Output Impedance = 50 Ohm / THD+N (Total Harmonic Distortion plus Noise) / Bandwidth = ±1dB@ 20Hz ~ 20kHz / EIN (Equivalent Input Noise)
  • Configurable Audio Output: Maximum level = 14 dBu / Output Impedance = 50 Ohm / THD+N(Total Harmonic Distortion plus Noise) / Bandwidth = 20Hz ~ 20kHz / EIN (Equivalent Input Noise)
  • Speaker line/Amplifier: Maximum Power = 800W (RMS) / Maximum Power (Siren + Message) = 1000W
  • Monitoring Speaker: Impedance = 8 Ohm / Maximum Power @ 1kHz = 1.6W / THD @ 1kHz = < 1% / Bandwidth @ -3dB = 100Hz ~ 12kHz


Type File Name Download
Catalog
[PDF] [en] PAVA_Catalog
Brochure
[PDF] [en] IDA8 System_Brochure
Datasheet
[PDF] [en] IDA8C-SW_Datasheet